Tension Loadcell
Series SDTT10
Specially designed for protecting cranes from overload and for measuring
the tension of wireropes.(500kg~10t/Rope)
In many industrial applications the tension in were rope needs to be carefully and continaously momitored.
usually al load cells placed in series with the rope, either at a point along its length or more commonly between the end of the rope and the fixture. the problem is that such a load cell is best suited to new application where it is designed in at an early stage
SPECIFICATIONS
TYPE | SDTT10 |
Rated capacity (R.C.) | 500kg,1,1.5,2.5,4,8,10t/Rope |
Rated output(R.O.) | Approx.1.0mV/V |
Non-linearity | ≤1.0% R.O. |
Hysteresis | ≤1.0% R.O. |
Non-repeatability | ≤1.0% R.O. |
Creep error | ≤1.0% in 20min |
Zero balance | ≤1% R.O. |
Compensated temperature range | -10 ~ 70℃ |
Operating temperature range | -20 ~ 80℃ |
Temp. effect on rated output | ≤0.05% LOAD/10℃ |
Temp.effect on zero balance | ≤0.05% R.O./10℃ |
Terminal input resistance | 400 Ohms ± 10 Ohms |
Terminal output resistance | 350 Ohms ± 5 Ohms |
Insulation resistance (Min.) | 2000 MOhms at 50V DC |
Recommended excitation | 10V (Recommended),15V (Max.) |
Electrical connection | Ø7mmx6m (22AWG x 4Core Shielded) |
Protection class | meets IP 65 |
Safe overload | 200% R.C |
Ultimate overload | 400% R.C |
Dimension-mm
Rated Capacity | C | DT | H | T | W | ØD Wire rope | Weight（kg） |
0.5t,1t | 60 | 15.5 | 145 | 20 | 34 | Ø 6 ~ Ø 8 | 1.6 |
1.5t | 70 | 21 | 167 | 22 | 42 | Ø 10 ~ Ø 14 | 2.1 |
2.5t | 75 | 27 | 180 | 22 | 48 | Ø 14 ~ Ø 20 | 2.6 |
4t | 90 | 35 | 215 | 25 | 62 | Ø 18 ~ Ø 28 | 3.7 |
8t,10t | 100 | 45 | 250 | 35 | 80 | Ø 25 ~ Ø 35.5 | 7.0 |
* Specifications are subject to change without notice
WZO CONTROLS LTD